Open Access
Issue
Int. J. Metrol. Qual. Eng.
Volume 8, 2017
Article Number 12
Number of page(s) 8
DOI https://doi.org/10.1051/ijmqe/2016027
Published online 19 May 2017
  • A. Desrochers, A. Rivière, A matrix approach to the representation of tolerance zones and clearances, Int. J. Adv. Manuf. Technol. 13, 630 (1997) [CrossRef]
  • P. Bourdet, L. Mathieu, C. Lartigue, A. Ballu, The concept of the small displacement torsor in metrology, Ser. Adv. Math. Appl. Sci. 40, 110 (1996)
  • M. Kamalinejad, F. Vignat, F. Villeneuve, Simulation of the geometrical defects of manufacturing, Int. J. Adv. Manuf. Technol. 45, 631 (2009) [CrossRef]
  • S. Tichadou, M.K. Nejad, F. Vignat, O. Legoff, 3D manufacturing dispersions: two experimental applications, in 10th CIRP International Seminar on Computer Aided Tolerancing, Paris (2007)
  • M.H. Bui, A. Sergent, F. Villeneuve, Model of manufactured part and Monte Carlo simulation with experimental data, in 12th CIRP Conference on Computer Aided Tolerancing Manufacturing Tolerance Analysis (2010), Vol. 22
  • B.-F. Alistair, Least squares best-fit geometric elements, NPL Report DITC Affiliation (Nationale Physical Laboratory, 1989)
  • M.H. Bui, Identification et simulation des incertitudes de fabrication, PhD from the University of Grenoble, 2011
  • A. Rivière, A. Clément, M. Temmerman, Cotation Tridimensionnelle des Systèmes Mécaniques (Pyc livres, Paris, 1994)
  • A. Clément, Une science nommée technologie, Technol. Form. 108, 32 (2003)
  • A. Duret, Capabilité et pilotage d'un processus d'usinage, Technol. Form. 115, 31 (2004)
  • A. Giordano, Clearance space and deviation space. Application to three-dimensional chain of dimensions and positions, in Proc. of the 3rd CIRP Seminars on Computer-Aided Tolerancing, 1993 (1993)
  • G. Saporta, Probabilités, analyses des données et statistiques (Editions TECHNIP, 2006)
  • A. Sergent, Model and optimisation of a machining process thanks to the concept of elementary geometric minimum datum (EGMD), in 14th International CIRP, 2004 (2004)
  • M. Hien Bui, F. Villeneuve, A. Sergent, Manufacturing tolerance analysis based on the model of manufactured part and experimental data, Proc. Inst. Mech. Eng. B: J. Eng. Manuf. 5, 690 (2012)