Open Access
Review
Issue
Manufacturing Rev.
Volume 4, 2017
Article Number 12
Number of page(s) 9
DOI https://doi.org/10.1051/mfreview/2017012
Published online 10 November 2017
  • M. Gebler, A.J.M. Schoot Uiterkamp, C. Visser, A global sustainability perspective on 3D printing technologies, Energy Policy 85 (2015) 511 [CrossRef]
  • R. D'Aveni, The 3-D printing revolution, Harv. Bus. Rev. (2015) 40–48
  • L. Fang, S. Chen, T. Fang, J. Fang, C. Lu, Z. Xu, Compos. Sci. Technol. 138 (2017) 106–116 [CrossRef]
  • G. Ji, P. Zhang, J. Nji, M. John, G. Li, Recent Advances in Smart Self-healing Polymers and Composites, edited by G. Li, H. Meng (2015) pp. 293–363, ISBN: 978-1-78242-280-8 [CrossRef]
  • M. Naebe K. Shirvanimoghaddam, Appl. Mater. Today 5 (2016) 223–245 [CrossRef]
  • E. Gkartzou, E.P. Koumoulos, C.A. Charitidis, Manuf. Rev. 4 (2017) 1
  • F.C. Campbell, Structural composite materials, ASM Int. 05287G (2010) 10–27
  • C. Baillie, Green composites, in: Polymer Composites and the Environment, CRC Press, Taylor & Francis, 2005, ISBN 9780849325762
  • Y.S. Song, J.R. Youn, T.G. Gutowski, Compos. Appl. Sci. Manuf. 40 (8) (2009) 1257–1265 [CrossRef]
  • E.P. Koumoulos, D.A. Dragatogiannis, I.A. Kartsonakis, E. Karaxi, T. Kehagias, C.A. Charitidis, Int. J. Struct. Integr. 7 (2016) 671–689 [CrossRef]
  • E.P. Koumoulos, T. Parousis, A.F.A. Trompeta, I.A. Kartsonakis, C.A. Charitidis, Plast. Rubber Compos. 45 (2016) 106–117 [CrossRef]
  • E.P. Koumoulos, I.A. Kartsonakis, A. Bakolas, C.A. Charitidis, Manuf. Rev. 3 (2016) 20 [EDP Sciences]
  • E.P. Koumoulos, P. Jagadale, A. Lorenzi, A. Tagliaferro, C.A. Charitidis, Compos., Eng. 80 (2015) 27–36 [CrossRef]
  • E.P. Koumoulos, P. Jagdale, I.A. Kartsonakis, M. Giorcelli, A. Tagliaferro, C.A. Charitidis, Polym. Compos. 36 (2015) 1432–1446 [CrossRef]
  • Additive manufacturing: Print me a jet engine, The Economist, The Economist Newspaper Limited, 2012
  • 3D printing: A third-world dimension, The Economist, The Economist Newspaper Limited, 2012
  • 3D printing scales up, The Economist, The Economist Newspaper Limited, 2013
  • D.S. Engstrom, B. Porter, M. Pacios, H. Bhaskaran, Additive nanomanufacturing − a review, J. Mater. Res. 29 (2014) 1792–1816 [CrossRef]
  • O. Ivanova, C. Williams, T. Campbell, Additive manufacturing (AM) and nanotechnology: promises and challenges, Rapid Prototyp. J. 19 (2013) 353–364 [CrossRef]
  • H.N. Chia, B.M. Wu, Recent advances in 3D printing of biomaterials. J. Biol. Eng. 9 (2015) 1–14 [CrossRef]
  • I. Volyanskii, I.V. Shishkovsky, Laser-assisted 3D printing of functional graded structures from polymer covered nanocomposites: a self-review, in: Igor Shishkovsky (Ed.), New Trends in 3D Printing, InTech, 2016
  • T.A. Campbell, O.S. Ivanova, 3D printing of multifunctional nanocomposites, Nanotoday 8 (2013) 119–120 [CrossRef] [EDP Sciences]
  • R. Winkler, F.P. Schmidt, U. Haselmann, J.D. Fowlkes, B.B. Lewis, G. Kothleitner, P.D. Rack, H. Plank, Direct-write 3D nanoprinting of plasmonic structures, ACS Appl. Mater.Interfaces 9 (2017) 8233–8240 [CrossRef]
  • R. D. Farahani, M. Dubé, D. Therriault, Three-dimensional printing of multifunctional nanocomposites: manufacturing techniques and applications, Adv. Mater. 28 (2016) 5794–5821 [CrossRef]
  • J.W. Lee, 3D Nanoprinting technologies for tissue engineering applications, J. Nanomater. 2015 (2015) 1–14
  • J.W. Lee, 3D Nanoprinting technologies for tissue engineering applications, J. Nanomater. 2015 (2015) 14 Article ID 213521, doi:10.1155/2015/213521
  • M.C. O'Brien, B. Benjamin, F. Scott, L.G. Zhang, Tissue Eng. Rev. 21 (2014) 103–114 [CrossRef]
  • S.F.A. Acquah, B.E. Leonhardt, M.S. Nowotarski, J.M. Magi, K.A. Chambliss, T.E.S. Venzel, S.D. Delekar, L.A. Al-Hariri, Carbon nanotubes and graphene as additives in 3D printing, in: Mohamed Berber (Ed.), Carbon Nanotubes-Current Progress of their Polymer Composites, InTech, 2016
  • K. Chizari, M. Daoud, A.R. Ravindran, D. Therriault, 3D Printing of highly conductive nanocomposites for the functional optimization of liquid sensors, Small 12 (2016) 6076–6082 [CrossRef]
  • A.K. Au, W. Huynh, L.F. Horowitz, A. Folch, 3D-printed microfluidics, Angew. Chem. Int. Ed. 55 (2016) 3862–3881 [CrossRef]
  • K.N. Ren, J. Zhou, H. Wu, Materials for microfluidic chip fabrication, Acc. Chem. Res. 46 (2013) 2396–2406 [CrossRef]
  • http://www.dolomite-microfluidics.com/webshop/microfluidic-chips-c-17
  • M. Nofara, M.C. Heuzey, P.J. Carreaub, M.R. Kamal, J. Randall. J. Rheol. 60 (2016) 637 [CrossRef]
  • K. Prashantha, F. Roger. J. Macromol. Sci. 54 (2016) 24–29 [CrossRef]
  • S. Tofail, E.P. Koumoulos, A. Bandyopadhyay, S. Bose, L. Donoghue, C. Charitidis, Mater. Today, in press (2017), https://doi.org/10.1016/j.mattod.2017.07.001